Dorcy (reorder # 41-4287) is a tactical Led flashlight using Luxeon L.E.D which produces 80 lumens of light, powered by 3 x AAA size cells in a special battery carrier.

Overall Appearance
The body is an aluminum alloy construction looks seems to be really hard and tough. The head is little bigger then barrel which have 6 grooves on it which helps prevent it from rolling off on a flat surface. The barrel of the flashlight has texture (checkered) body and the same texture on battery cap which gives more grip. The brand name “DORCY” is mark on one side of the barrel. The quality of the workmanship is free from defect in material, and the machining work is really good.

Bezel / Head
The head of the light has grooves which serve as an anti rolling on a smooth surface and more improve grip. It consists of a clear polycarbonate lens, and a smooth shiny reflector. Luxeon led which is rated to produce 80 lumens of light. The led is very well centered in the reflector. The lens is recessed in the head to prevent some protection if the light is placed on its head.

LED
The LED used in Dorcy 41-4298 is one of most high power output LED made by Lumileds. It is the next generation of Luxeon type leds which is named as LUXEON Rebel which is rated @ 80 Lumens. The Luxeon Rebel is its self a very high intensity led made by worlds best led manufacture and can be used by Dorcy even in there low end products to make it the best value for there products.

The picture is taken from Philips Lumileds Lighting Company.

Output
The light produce the Flashlight is pure white with slightly non-noticeable yellow tint. And has good color temperature. It contains a yellow tint which gives quite good rendition during practical usage. The beam is focused in a medium spot for small to medium range throw and has quite useable wide spill beam. This 80 lumen flashlight features an intense beam of light that projects an output of 100 feet.

Switch
The switch is a rubber covered reverse-clickie in the tail cap. Press for on, press for off. When on, you can press gently to blink the light. Since the rubber cap slightly beyond the plane of the tail cap, the light will not stand on end. You can lock-out the switch by unscrewing the tail cap 1/2 turn. This will prevent accidental activation when packing the light in your backpack or luggage.

Batteries
3 x AAA size batteries are required to run the flashlight Dorcy Master Cell Alkaline are included in the package. The flashlight uses batteries carrier in its barrel, the quality of the battery carrier seems to be very much solid and the spring / nobs are quite unbreakable and hold the batteries tightly. 8 hours estimated run time achieved by using fresh alkaline batteries.

Tail Cap
Through the tail cap you can access to the batteries / battery carrier. The switch assemble is completely water resistance and permanently install in the tail cap. The tail cap also has texture which help in improved grip to screw – unscrew the tail cap when battery changing.

Seals / Water Resistance
The flashlight is protected from the environments by O-rings at both end of the body tube. The switch is also water resistant, the light can be used under wet environment like raining etc. make sure your both ends of light (head and tail cap) are screw tightly against the body to prevent it from water. Caution: The light can be used under wet environment NOT under water.

Ergonomics
The body tube or barrel has texture, and the head grooves give quite good grip and light is very handy even you hold the light in formal style or in tactical style.

Accessories
There are 3 AAA sizes Dorcy Master Cell Alkaline are included.

• Technical Specifications

• Item Reviewed DORCY LED 80 Lumens Luxeon Rebel (41-4287)
• Case Material Aluminum Alloy
• Case Features N/A
• Case Access Type Unscrew Tail cap
• Switch Type Clickie (reverse-type)
• Reflector Type Smooth Plastic
• Lens Type Polycarbonate Plastic
• Bulb Type Luxeon Rebel
• Beam Type Focused medium spot
• Beam Characteristics Focused medium spot with a wide corona
• Output (advertised) 80 Lumens
• Battery / Power Type 3 x AAA – alkaline or NiMH
• Battery Life 8 Hours (estimated run time when using fresh alkaline batteries)
• Environmental Protection O-rings
• Weight with batteries Unknown
• Warranty 1 year from Dorcy
• Manufacturer Dorcy International
• How To Buy Dorcy Direct
• Product Link DORCY LED 80 Lumens Luxeon Rebel (41-4287)

Dorcy (reorder # 41-4299) is a rechargeable led flashlight using CREE XRE L.E.D which produces 220 lumens of light, powered by 4.8V 700mAh NiCad battery pack, comes with AC charger and 12V car charger.

Overall Appearance
The body is a really hard and tough aluminum construction with some real hard type anodizes finish. The head is bigger then barrel which have several grooves for anti-rolling when place on a flat surface horizontally. Next to the head there are rings which serve as a heat sink to dissipate the heat produce from the high power output led to protect it from thermal runaway. The barrel of the flashlight has texture body and the same grooves on battery cap which gives more grip and anti-rolling. The brand name “DORCY” is mark on both side of the barrel. The quality of the workmanship is free from defect in material, and the machining work is really good.

Bezel / Head
The head of the light has grooves which serve as an anti-rolling on a smooth surface when place horizontally. It consists of a clear polycarbonate lens, and a very shiny real deep optimized reflector system for maximum light output. CREE XRE LED which produces 220 lumens of light. The led is very well centered in the reflector. The lens is recessed in the head to prevent some protection if the light is placed on its head.

LED
The LED used in Dorcy 41-4299 is the most high power output LED made by a very well reputed led manufacturer from Australia named as Cutter Electronics. It is the over modified generation of CREE LEDs which named as CREE XRE LED; its output is over 220 lumens. The CREE XRE is its self a very high intensity led made by the world leading led manufacture and Dorcy select it for its really outdoor tactical flashlight to make it the best ever value product.

Output
The light produce by the flashlight is 100% pure white, no tint is notice (tint also seems to be pure white). And has excellent color temperature, It gives real good rendition during practical use because of its white light even in all ambient lighting conditions. It is a best choice to use it in smoke or even in fog. The beam is focused in a tight spot for a real long range throw up to more then 300 meters, its deep reflector work very well. It produces a tight spot of light with usable spill beam and quite wide corona. Due to its sharp tight focus beam it cuts through smoke and fog easily.

It can be used as an electric candle in a ceiling bounce back mode, which lit the room very well.

Switch
The switch is located on a barrel near the head. It is rubber covered push button clicke switch press for on and press for off.

Batteries
It has a removable rechargeable battery pack inside the barrel. This is 4.8V 700mAh NiCad (Nickel Cadmium) battery. It seems to be a battery pack of 4 cells 1.2 700mAh each which gives almost 2 hours of run time when fully charged. An AC Charger and 12V Car Charger is included in the package.

Tail Cap
Through the tail cap you can access to the battery but no need of it because of it rechargeable battery system. The tail cap also has grooves which help in anti rolling and improved grip. The tail cap is flat at its end and little wide then the barrel to help the flashlight stands up on its tail cap, which allows the flashlight to serve as an electric candle in a ceiling bounce back mode.

Seals / Water Resistance
The flashlight is protected from the environments by O-rings at both end of the body tube. The switch is also water resistant, the light can be used under wet environment like raining etc. Make sure your both ends of light (head and tail cap) are screw tightly against the body to prevent it from water. Caution: The light can be used under wet environment NOT under water.

Extra Features
The Flashlight is equipped with rechargeable battery and comes with two chargers, AC charger and 12v car charger. The charging point is located near the switch under a metal rotary cover. A multiple charger option makes it more versatile to be used in home and outdoors means where ever you are you have option to charge it with ac adaptor or with car cigarette lighter plug.

Ergonomics
The body tube or barrel has texture, and the head and tail cap grooves gives quite good grip and light is very handy even you hold the light in formal style or in tactical style. The aluminum contraction makes it tough and light weight to handle the flashlight easily.

Accessories
There are one 4.8V 700mAh NiCad (Nickel Cadmium) rechargeable battery pack, one AC Charger and one 12V car Charger comes with the package along with one high power 220 lumens flashlight which is equipped with CREE XRE LED in a Optimized Reflector System.

• Technical Specifications

• Item Reviewed DORCY LED Rechargeable (41-4299)
• Case Material Aluminum Alloy
• Case Features Metal cover near the switch for assess the charging point
• Case Access Type Unscrew Tail cap
• Switch Type Clicke (push button switch)
• Reflector Type Smooth deep Plastic
• Lens Type Polycarbonate Plastic
• Bulb Type CREE XRE
• Beam Type Focused tight spot
• Beam Characteristics Focused tight spot with a wide corona and spill beam
• Output (advertised) 220 Lumens
• Battery / Power Type 4.8V 700mAh NiCad
• Battery Life 2 Hours
• Environmental Protection O-rings
• Weight with batteries Unknown
• Warranty 1 year from Dorcy
• Manufacturer Dorcy International
• How To Buy Dorcy Direct
• Product Link DORCY LED Rechargeable (41-4299)

Dorcy (reorder # 41-4297) is a 6 watt tactical flashlight using Luxeon K2 L.E.D which produce 120 lumens of light, powered by 3 x AAA cells in a special battery carrier, with built-in battery indicator.

Overall Appearance
The body is an aluminum alloy construction looks seems to be really hard and tough. The head is little bigger then barrel which have 6 groves on it which helps prevent it from rolling off on a flat surface. The barrel of the flashlight has texture (checkered) body and the same groves of battery cap which gives more grip and anti-rolling. The brand name “DORCY” is mark on one side of the barrel. The quality of the workmanship is free from defect in material, and the machining work is really good.

Bezel / Head
The head of the light has groves which serve as an anti rolling on a smooth surface and more improve grip. It consist of a clear polycarbonate lens, and a deep smooth shiny reflactor. Luxeon K2 led which is rated 6 watt of power and produce 120 lumens of light. The led is very well centered in the reflector. The lens is recessed in the head to prevent some protection if the light is placed on its head.

LED
The LED used in Dorcy 41-4297 is one of most high power output LED made by Lumileds. It is the next generation of Luxeon type LEDs which is named as mention above Luxeon K2 which is rated 6 Watt @ 120 Lumens. The Luxeon K2 is its self a very high intensity led made by worlds best led manufacture and can be used by Dorcy even in there low end products to make it the best value for there products.

Output
The light produce the Flashlight is pure white with slightly non-noticeable yellow tint. And has good color temperature. It contains a yellow tint which gives quite good rendition during practical usage. The beam is focused as a spot for a long range throw and has quite useable spill beam with wide corona.

Switch
The switch is complete electronic. It gives a feel like tic – tic touch button. Press for on and then press for off. It has a electronic battery indicator inside of the switch, its terminal nob can be found on one end of the switch assemble which touch the battery carrier. The indicator itself shows the battery power in a way that when the battery is more then 20% of its total power the indicator will show green light and when the battery power goes less then 20% it will turn red. (Very dim and diffuses light, cannot disturb user during practical use).

Batteries
3 x AAA size batteries are required to run the flashlight Energizer Alkaline LR03 are included in the package. The flashlight uses a batteries carrier in its barrel, the quality of the battery carrier seems to be very much solid and the spring / nobs are quite unbreakable and hold the batteries tightly.

Tail Cap
Through the tail cap you can access to the batteries / battery carrier. The switch assemble is completely water resistance and permanently install in the tail cap. The tail cap also has groves which help in anti rolling and improved grip to screw – unscrew the tail cap when battery changing. There is a small hole at the very end of the tail cap for lanyard attachment.

Seals / Water Resistance
The flashlight is protected from the environments by O-rings at both end of the body tube. The switch is also water resistant, the light can be used under wet environment like raining etc. Make sure your both ends of light (head and tail cap) are screw tightly against the body to prevent it from water. Caution: The light can be used under wet environment NOT under water.

Extra Features
The light also serve as an electric candle. Unscrew the head and place the light of a flat surface .Since the switch cap is fully recessed in the tail cap, the light will stand on its end. While this feature is not specified by the manufacturer.

Ergonomics
The body tube or barrel has texture (knurling), and the head and tail cap groves give quite good grip and light is very handy even you hold the light in formal style or in tactical style.

Accessories
There are 3 AAA size Energizer alkaline cells LR03 included.

• Technical Specifications

• Item Reviewed DORCY 6 WATT Luxeon K2 (41-4297)
• Case Material Aluminum Alloy
• Case Features Unscrew head for candle mode
• Case Access Type Unscrew Tail cap
• Switch Type Click (sounds Tic – Tic)
• Reflector Type Smooth Plastic
• Lens Type Polycarbonate Plastic
• Bulb Type Luxeon K2
• Beam Type Focused medium spot
• Beam Characteristics Focused medium spot with a wide corona
• Output (advertised) 120 Lumens
• Battery / Power Type 3 x AAA – alkaline or NiMH
• Battery Life N/A
• Environmental Protection O-rings
• Weight with batteries Unknown
• Warranty 1 year from Dorcy
• Manufacturer Dorcy International
• How To Buy Dorcy Direct
• Product Link DORCY 6 WATT Luxeon K2 (41-4297)

Energizer HARD CASE work is a super bright Nichia LED hard case flashlight which survives 30 foot or more drop test and completely water resistant, gives 50 hours of run time with 2 x AA alkaline batteries, two energizer LR6 are included. The Energizer has also a wide range Hard Case Work series which include 4AA Light, 4AA Swivel, 2D Light, 4D Lantern.

Overall Appearance
The body of the Energizer Hard Case Work is tough polymer with thick rubber surround coating, has two flat panels on either side and is semi square in shape. The rubber is a texture for improve grip over weather condition, the plat panels have a company and product brand name on a metal plat which is in grove with L-Key screws. The head and tail cap is completely rubber coated on a hard polymer plastic and the body is clipped fitted and screws ensure the toughness of the light. The impact resistant body and the LED make the light “The Toughest Flashlight You’ll Ever Need”.

Bezel / Head
The bezel / Head area consist of a black rubber surround, a polycarbonate convex lens with scratch resistant coating, and a lamp which includes a Nichia 5 mm LED, a voltage booster circuit are combine together with a convex lens to provide a balance spot of beam are permanently install with the body to make it a single part.

Output
The output light produce by the flashlight is pure white with slightly non-noticeable blue tint which is typical for 5mm Nichia LED’s and has good color temperature. It has a convex lens in front of a LED which gives a focused medium spot of beam. Little artifacts can be seen in the corona around the central spot.

Switch
The switch is a rubber covered reverse-clickie located on the flat top near a head. Press for on, press for off. The switch is recessed in the body by a rubber surround which defiantly protect the switch by accidental activation.

Seals / Water Resistance / Batteries
The Flashlight is completely water resistant as its construction shows, fully capable to sink in water, mud, or even in chemical liquids (except those who are sensitive to rubber and polymer). The only access to the body is it tail cap which is seal with O-ring and the design of the tail cap it self makes a perfect weather resistance. The 2 x AA size cells are required to rum the flashlight for 50 hours (advertised). To access the battery unscrew the tail cap drop out the old one and place a new set of batteries positive first each one.

Extra Features
The Energizer Hard Case Work is a Toughest Flashlight! to ensure that I drop my light from the roof on a concrete floor over almost 30 feet, I also through it on the ground at a distance of nearly 100 feet, even in a water pound and also wrap it in mud then wash it with warm water, during the all process the light is switch on and the end its keep running with no, not even a single scratch on it, the switch still works normal the LED, the water resistance seal work perfectly. It’s really a Solid Choice for Tough Jobs.

The rubber coating around the head and the life time bulb means LED shows its hardness and make it real practical, also the lens is recessed in the head to protect it from impact. The tail cap also fully rubber coated and the construction of tail cap and head even the whole body makes the light shock prove.

Plus it has a Lanyard attachment point on the tail cap if you like to hang up the light with your working gear with carabineer clip or etc. Also the tail cap is flat at its end and can easily stand up to work as a electric candle by shooting the beam on ceiling to bounce back the light to lit up the room.

• Technical Specifications

• Item Reviewed Energizer Hard Case Work (TUF2AA1E)
• Case Material Polymer Plastic / Rubber
• Case Features Hard Polymer Plastic with Rubber Coat semi square body
• Case Access Type Unscrew Tail cap
• Switch Type Clickie (reverse-type)
• Reflector Type N/A
• Lens Type Polycarbonate Plastic (Convex Type)
• Bulb Type 1x 5 mm Nichia LED
• Beam Type Focused medium spot
• Beam Characteristics Focused medium spot with a little artifacts corona
• Output (advertised) N/A
• Battery / Power Type 2 x AA – alkaline or NiMH
• Battery Life 50 Hours
• Environmental Protection O-ring seals
• Weight with batteries Unknown
• Warranty N/A
• Retail Cost $15.00

Powerlight is a small pocket LED Flashlight available from dealextreme.com. Equipped with straw hat led which clams to 1 watt runs on a single AA cell for about 2 – 4 hours. The LED and reflector not quite well fixed but the light is quite good for its size and power source.

Overall Appearance
The body of the Powerlight is machined aluminum with anodize finish and is available in black and gray only. Although the light is anodize finish but it’s easily stacked out when keep the light with keys or coins in a pocket. The outside of the body has several rings machined into the surface to help with grip and you will also find flat panels around the central area of the body for texture and display of the company logos. The tail cap has a textured area for grip as well as a recessed switch for standing on end and a lanyard attachment point. A lanyard is attached with the light.

Bezel / Head
The head of the Powerlight includes a plastic lens, a plastic smooth reflector, an straw hat 1 watt LED, Despite the fact these type of LED’s are mostly in 0.5 watt rated power but manufacturer clams it 1 Watt, and a regulator circuit, all permanently installed. The LED is not perfectly centered in the reflector, which cause a little off word beam but ok during practical use.

Output
Output is very good for a single AA alkaline cell. Using an alkaline cell, output is semi-regulated and diminishes over time. The light produced by the LED is a high color temperature and produces good color but, blue tint is detectable when compared against a near sunlight-white source. Or even when you put light on a white wall.

Beam shot at center on target to show the off word beam spot

Switch
The switch is a rubber covered clickie and is fully recessed in the tail cap which allows the light to stand on end and be used as an electric candle. It is very easy to use. Click on, click off. Lock out function available with 1 full turn.

Seals / Water Resistance / Batteries
The light is protected from the environment by an o-ring at both ends of the body tube, a rubber switch cover and a sealed bezel. While the light is seems to be a splash able but not dive able cause no water resistant’s depth is shown by the manufacturer. The Powerlight is operating on single AA size alkaline cell while NiMH also works well. Its runtime is almost 2 – 4 hours.

• Technical Specifications

• Item Reviewed Powerlight (HX-G011) 1 Watt LED
• Case Material Anodized aluminum in Black Finish
• Case Features Rings on head and flat panels around central area, texture around tail cap.
• Case Access Type Unscrew Tail cap
• Switch Type Clickie (reverse-type)
• Reflector Type Polished Plastic
• Lens Type Plastic
• Bulb Type Straw Hat type LED
• Beam Type Spot
• Beam Characteristics Spot with slight wide spill beam (LED is little off center)
• Output (advertised) N/A
• Battery / Power Type AA – alkaline or NiMH
• Battery Life (advertised) 2 – 4 hours
• Environmental Protection O-ring seals
• Weight with batteries Unknown
• Warranty N/A
• Retail Cost $4.76 at http://dealextreme.com

Dorcy (reorder # 41-4285) 1 Watt focusing tactical flashlight using Nichia surface LED with up to 45 lumens of light, powered by 3 x AAA cells in a special battery carrier which gives up to 15 hours run time with one set of battery.

Overall Appearance
The body is an aluminum alloy construction looks seems to be really hard and tough. The head is little bigger then barrel which have 6 groves on it which helps prevent it from rolling off on a flat surface and also proves grip when focusing needed. The barrel of the flashlight has texture (checkered) body and the same thing of battery cap which gives more grip. The brand name “DORCY” is mark on one side of the barrel. The quality of the workmanship is free from defect in material, and the machining work is really good.

Bezel / Head
The front of the light consists of a smooth polycarbonate optical lens. The lens is slightly recessed in the head. Under the lens you will find NICHIA Power LED Series (SMD type) on a well design circuit board with resistor. Resistor helps the LED to limiting the current, providing thermal runaway.

Output
The light produce by the Flashlight is pure white with slightly non-noticeable yellow-blue tint. And have good color temperature. It contents a yellow-blue tint which gives quite good rendition during practical usage. It has a focusing feature as mention above by its name. When the head is completely focus out it gives quite good round illumination light ring with some spill beam, no dark area because of surface LED and optical lens. When the head is completely focused it gives quite tight spot of light for distance lighting up to 100 feet, with a little spill beam.

Tight Focus

Wide Focus

Candle Mode

Switch
The switch is a plastic covered reverse-clickie in the tail cap. Press for on, press for off. When on, you can press gently to blink the light. Since the plastic cap slightly beyond the plane of the tail cap, the light will not stand on end.

Seals / Water Resistance / Batteries
An o-ring at both ends of the body tube, a plastic switch cover and a O-ring bezel, protects the light from the wet environment. To change the batteries: unscrew the tail cap, drop out a battery carrier which feels quite tough and well made, pull out the old ones and place a new set of battery observing proper polarity. Reattach the tail cap and you are ready for action. The light is direct driven so it runs on 3 x AAA size cells, Alkaline and NiMH.

Extra Features
The Dorcy 1 WATT (# 41-4285) is reversible flashlight in which you can convert this long range focusing flashlight into electric candle for area illumination. To convert the flashlight into candle, put head screwed out and place it under its end downward, so that barrel stands in the head and its working light a electric candle.

• Technical Specifications

• Item Reviewed Dorcy (reorder # 41-4285) 1 WATT focusing tactical flashlight
• Case Material Aluminum Alloy Construction
• Case Features Faceted groves around head, texture around tail cap
• Case Access Type Unscrew tail cap
• Switch Type Reverse-click
• Reflector Type N/A
• Lens Type Optical polycarbonate lens (Convex type)
• Bulb Type NICHIA Power LED Series (SMD type)
• Beam Type Tight Spot and Wide beam
• Beam Characteristics Tight spot with round spill beam and Wide beam when dial focused out
• Output (advertised) 45 Lumens
• Battery / Power Type 3 x AAA – alkaline or NiMH
• Battery Life (advertised) 15 hrs
• Environmental Protection O-ring seals
• Weight with batteries Unknown
• Warranty 1 Year
• Retail Cost $12.99

The ultra plus is a hybrid LED flashlight from Very Lite, using Nichia LED’s, 0.5-Watt and 5mm for long range and directional illumination flood lighting. Powered by 3 x AA size cells. Rubber body in black and yellow rings.

Overall Appearance
The body of the ultra plus is made up of hard rubber to make it shocks prove, resistant against rust, dust and water. The head is little bit bigger then the barrel of the light and have hard rubber coated rings on the barrel for more improve grip even you are a using a gloves. A plastic split ring is available at the end for hanging, despite the fact it can’t stand on it end.

Bezel / Head
The head of the ultra plus includes 5mm flat head 0.5watt LED arranged with a plastic silvered reflector for distance throw, and a 3 x 5mm Nichia LED’s for Directional flood lighting. All installed permanently in a single module, but as it is LED it never need place. Individual resisters inside the module protect the LED’s for thermal runaway and over amperage.

Output
The output is quiet good, 1 LED is used for distance lighting and 3 LED’s are used for directional area lighting. Light produce by the ultra plus is near to pure white because of using Nichia LED’s no tint is detected.

0.5 Watt Single LED mode for distance lighting

3 x 5mm Nichia LED mode for directional flood illumination

0.5 watt and 3 x 5mm LED mode for distance and directional illumination

Switch
A reveres series click switch is located on the flat top near a head. Which act as a series switch means when it is press for the first time it activates the single long distant light, when it press for the second time, the signal center led is off and the 3 LED’s on, for the third time it activates the all LED’s and for the forth time, everything became dark means OFF.

Seals / Water Resistance / Batteries
The light is made of complete rubber plastic covering, only head is removable which have o-ring to protect the light from water even any type of liquid (except chemicals). So we can call it complete water prove flashlight. 3 AA size cells are required to power the light, alkaline, NiMH, are reported to work well in the light. To change the batteries unscrew the head of the light and drop out the old one and place new (-ve) first of each. And you are ready to go.

Extra Features
It has a hanging loop at its end for hanging the light with your gear or on walls for quick assess when needed, the loop is foldable for convenience in usage, as shown in the pictures the material of the light is ABS(Acrylonitrile Butadiene Styrene) plastic which is quick tough.

• Technical Specifications

• Item Reviewed Very Lite (Ultra Plus)
• Case Material Plastic Rubber
• Case Features Round head and barrel with rubber covered rings
• Case Access Type Unscrew Head
• Switch Type Series-Click (reverse-type)
• Reflector Type Polished Plastic
• Lens Type Plastic
• Bulb Type 1 x 5mm 0.5 watt LED + 3 x 5mm Nichia LED’s
• Beam Type Spot and Directional flood
• Beam Characteristics Central spot with round spill beam and directional flood
• Output (advertised) Unknown
• Battery / Power Type 3 x AA – alkaline or NiMH
• Battery Life (advertised) 4 – 8 hrs
• Environmental Protection O-ring seals
• Weight with batteries Unknown
• Warranty Unknown
• Retail Cost Send by a special friend Mr.Salman Bashir from U.K

1-Watt ‘Sapphire’ type LED flashlight powered by single AA size alkaline or NiMH battery, which gives 2.5 hours (advertise) peak power output, gives up to 35 lumens of light in a spot with slight corona and wide spillbeam. Tactical tail cap switch and body groves give improve hand grip. Available at GoldenGadgets.com

Overall Appearance
The body of this light is machined aluminum with an anodized finish and is available in black only. Although information from the factory is not available on the type of anodize, a third party has provided information that leads us to believe that it is Type II. The body and head are completely cylindrical and there is a wide ring of gentle checkering around the head and body. The tail has several holes cut into it. This allows a lanyard (included) to be attached. The tail is not completely flat, so not allowing it to stand on end. The rubber cover rise little bit high from body.

Bezel / Head
At the front of the light you will find a recessed plastic lens with a 1 Watt LED inside a smooth reflector. Despite the use of a smooth reflector, the beam is quite nice and produces a fairly tight spot. Let’s take a close-up look The LED itself – the top is almost flush with the surface of the board. 14 little gold bond wires are visible, which means. There are actually 7 LED’s inside this one module.

Output
The light produce by the led is really pure white light, the output is quite high with its size and had a medium central spot with a fairly good round spill beam, and no tint is detected when compare to nearly sunlight source. The light throw is to be use with in 50 to 60 feet. (Distance vary depend upon the eyesight of the user).

Switch
The switch is a rubber covered clickie and is not fully recessed in the tailcap which don’t allows the light to stand on end and be used as an electric candle. Despite the fact, it is very easy to use. Click on, Click off. You can lockout the switch by unscrewing the tailcap 1/2 turn. This will prevent accidental activation when packing the light in your backpack or luggage.

Seals / Water Resistance / Batteries
An o-ring at both ends of the body tube, a rubber switch cover and a sealed bezel, protects the light from the environment. Company advertises the light as “waterproof” with no specific depth rating. If it gets wet inside, just disassemble as much a possible without tools and let it dry before using again. To change out the battery: unscrew the tailcap, drop out the old cell, and place in new cell observing proper polarity. Reattach the tailcap and you’re ready to go.

• Technical Specifications

• Item Reviewed F-62AA (model # according to GoldenGadgets.com)
• Case Material Anodized Type II aluminum
• Case Features Faceted sides around center, texture around tailcap
• Case Access Type Unscrew Tailcap
• Switch Type Clickie (reverse-type)
• Reflector Type Polished Plastic
• Lens Type Plastic
• Bulb Type 1-Watt ‘Sapphire’ type LED
• Beam Type Spot
• Beam Characteristics Central smooth spot with slight corona and wide spillbeam
• Output (advertised) 24.90 LUX Throw, 25.50 LUX Overall, 35.45 LUMENS
• Battery / Power Type AA – alkaline or NiMH
• Battery Life (advertised) 2.5 hours
• Environmental Protection O-ring seals
• Weight with batteries Unknown
• Warranty Unknown
• Retail Cost $19.99 at http://goldengadgets.com