Energizer HARD CASE Work (TUF2AA1E)

Energizer HARD CASE work is a super bright Nichia LED hard case flashlight which survives 30 foot or more drop test and completely water resistant, gives 50 hours of run time with 2 x AA alkaline batteries, two energizer LR6 are included. The Energizer has also a wide range Hard Case Work series which include 4AA Light, 4AA Swivel, 2D Light, 4D Lantern.

Overall Appearance
The body of the Energizer Hard Case Work is tough polymer with thick rubber surround coating, has two flat panels on either side and is semi square in shape. The rubber is a texture for improve grip over weather condition, the plat panels have a company and product brand name on a metal plat which is in grove with L-Key screws. The head and tail cap is completely rubber coated on a hard polymer plastic and the body is clipped fitted and screws ensure the toughness of the light. The impact resistant body and the LED make the light “The Toughest Flashlight You’ll Ever Need”.

Bezel / Head
The bezel / Head area consist of a black rubber surround, a polycarbonate convex lens with scratch resistant coating, and a lamp which includes a Nichia 5 mm LED, a voltage booster circuit are combine together with a convex lens to provide a balance spot of beam are permanently install with the body to make it a single part.

Output
The output light produce by the flashlight is pure white with slightly non-noticeable blue tint which is typical for 5mm Nichia LED’s and has good color temperature. It has a convex lens in front of a LED which gives a focused medium spot of beam. Little artifacts can be seen in the corona around the central spot.

Switch
The switch is a rubber covered reverse-clickie located on the flat top near a head. Press for on, press for off. The switch is recessed in the body by a rubber surround which defiantly protect the switch by accidental activation.

Seals / Water Resistance / Batteries
The Flashlight is completely water resistant as its construction shows, fully capable to sink in water, mud, or even in chemical liquids (except those who are sensitive to rubber and polymer). The only access to the body is it tail cap which is seal with O-ring and the design of the tail cap it self makes a perfect weather resistance. The 2 x AA size cells are required to rum the flashlight for 50 hours (advertised). To access the battery unscrew the tail cap drop out the old one and place a new set of batteries positive first each one.

Extra Features
The Energizer Hard Case Work is a Toughest Flashlight! to ensure that I drop my light from the roof on a concrete floor over almost 30 feet, I also through it on the ground at a distance of nearly 100 feet, even in a water pound and also wrap it in mud then wash it with warm water, during the all process the light is switch on and the end its keep running with no, not even a single scratch on it, the switch still works normal the LED, the water resistance seal work perfectly. It’s really a Solid Choice for Tough Jobs.

The rubber coating around the head and the life time bulb means LED shows its hardness and make it real practical, also the lens is recessed in the head to protect it from impact. The tail cap also fully rubber coated and the construction of tail cap and head even the whole body makes the light shock prove.

Plus it has a Lanyard attachment point on the tail cap if you like to hang up the light with your working gear with carabineer clip or etc. Also the tail cap is flat at its end and can easily stand up to work as a electric candle by shooting the beam on ceiling to bounce back the light to lit up the room.

• Technical Specifications

• Item Reviewed Energizer Hard Case Work (TUF2AA1E)
• Case Material Polymer Plastic / Rubber
• Case Features Hard Polymer Plastic with Rubber Coat semi square body
• Case Access Type Unscrew Tail cap
• Switch Type Clickie (reverse-type)
• Reflector Type N/A
• Lens Type Polycarbonate Plastic (Convex Type)
• Bulb Type 1x 5 mm Nichia LED
• Beam Type Focused medium spot
• Beam Characteristics Focused medium spot with a little artifacts corona
• Output (advertised) N/A
• Battery / Power Type 2 x AA – alkaline or NiMH
• Battery Life 50 Hours
• Environmental Protection O-ring seals
• Weight with batteries Unknown
• Warranty N/A
• Retail Cost $15.00

About The Author Send Email to Waqar Hafeez

• Name:
  Waqar Hafeez
• Biographical Info:
  Electronics Engineer & Flashlight Tactics Analyst - I welcome you to flashlightreviews.info, I am offering my services to the whole respected of the flashlight lighting. Being attached with how they design and how they work, now I want to share my ideas and capabilities to the other manufactures and users. You will find in this website the professional work done by me. I am not only here to provide little or limited services, but my mission is to provide a platform for the flashlight users.
• Waqar Hafeez has written 8 reviews for us.